START HERE
How do I attach the stand to my TV? (not for wall mounting)
A
C
B
You’ll need: Phillips screwdriver and a soft surface to lay the TV on.
A Carefully place your TV face-down on a cushioned, clean surface.
B Find the front of the stand. Hook the tab on the stand column through the slot
on the TV stand, then push the stand into place.
C Secure the stand to your TV with the four provided screws.
QUICK
M4 (8 mm)
screws
SETUP GUIDE
19" LED TV
DX-19E310NA15
Front
- OR -
C
A
B
Thank you
How do I prepare my TV for wall mounting?
for purchasing this state-of-the-art
Dynex television. We hope you enjoy
the quality and reliability of this
television for years to come.
(not for use with a TV stand)
A Carefully place your TV face-down on a cushioned, clean surface.
B Remove the four screws that secure the stand column to your TV,
then remove the stand column.
Wall mount installation guide
(not included)
C See the instructions that came with your wall mount for more
information about how to correctly mount your TV.
MAKING CONNECTIONS
How do I watch TV (cable or satellite box) and/or connect a device such as a
DVD or Blu-ray disc player, game station, or camcorder?
Which cables do you have?
Your TV has several diꢀerent jacks for connecting devices. For the
best video quality, use the best available connection.
STOP!
Do not plug your
power cable in until
all other devices have
been connected.
VIDEO QUALITY
BEST
JACK TYPE
CABLE CONNECTOR
Using an HDMI cable (BEST)
Multi-purpose jacks: You can plug any
device that uses HDMI into either HDMI
jack. However, certain devices must be
plugged into the HDMI 1 (DVI) jack.
See the documentation that came
with your DVI device.
HDMI video/audio
BETTER
GOOD
Component video and analog audio
Note: This TV only supports DVI video.
Composite video and analog audio (AV)
Coaxial video/audio
Included accessories
GOOD
Note: You can also connect a DVI device to your TV. See your online User Guide for
connection instructions. This TV only supports DVI video.
Note: The component and AV jacks
are shared. This means you can
connect only one component or AV
device at a time. We suggest
uprading to HDMI if your device
supports it.
Using component cables (BETTER)
- OR -
Power adapter
AUDIO/VIDEO OUT
Component cable option
Features
Using an AV cable (GOOD)
Front view
Remote control
and two AAA batteries
Remote control sensor
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
Power indicator
Back view
DC
(12V)
DX-RC5NA-15
MENU
INPUT
click Support & Service, enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click Search.
AUDIO/VIDEO
OUT
TV stand
Note: Connect the yellow video
cable cable connector to the
green VIDEO/Y jack.
AV cable option
VOL
How do I connect my TV to an antenna or cable wall jack?
CH
M4 screws
(8 mm length) (4 pcs.)
CABLE
DC IN
(12V)
ANT/
DC IN
(12V)
SERVICE
PORT
ANT/
CABLE IN
CABLE IN
Note: Images do not necessarily represent the exact design of your television.
OVER
Before using your new product, please read these instructions to prevent any damage.
|